# Standoffs on Logic Pro for support

**URL:** <https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712>\
**Category:** Uncategorized\
**Created:** [April 29, 2026, 4:27pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712 "2026-04-29T16:27:55Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![chwilliams](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@chwilliams](https://discuss.saleae.com/u/chwilliams)\
**Post date:** [April 29, 2026, 4:27pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712/1 "2026-04-29T16:27:55Z")

</div>

Hi,

Has anyone mounted their Saleae Logic Pro 16 on standoffs? Kind of like how you might do for PCBs? I’d like to raise the analyzer up off the platform it’s on and the easiest way I can think of doing that is by unscrewing those torx screws and putting in my own mounting support. I’m not sure how easy that is to do, and I don’t want to break something.

---

<div class="post-metadata">

**Author:** ![P.Jaquiery](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/p.jaquiery/32/289_2.png) [@P.Jaquiery](https://discuss.saleae.com/u/P.Jaquiery)\
**Post date:** [April 29, 2026, 9:43pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712/2 "2026-04-29T21:43:24Z")

</div>

Can you 3D print a cradle for it instead? That way there is no need to unscrew anything and it is trivial to change from “on the desk” mode to “elevated” mode.

---

<div class="post-metadata">

**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\
**Post date:** [May 4, 2026, 11:58pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712/3 "2026-05-04T23:58:05Z")

</div>

@chwilliams There is a community created Saleae Logic holder below that might help in case this was close to what you were looking for.

> **[Saleae Logic Holder by PCBGRIP](https://www.thingiverse.com/thing:735911/files)**
>
> These holders are designed to hold your Saleae logic analyzer. There is a 3mm mounting hole that allows you to attach the analyzer to something. We are using the holder to hold our Saleae logic analyzer against OpenBeam, which is used as part of...

---

<div class="post-metadata">

**Author:** ![chwilliams](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@chwilliams](https://discuss.saleae.com/u/chwilliams)\
**Post date:** [May 18, 2026, 4:12pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712/4 "2026-05-18T16:12:51Z")

</div>

Interesting. Yes, I think this can be used as the starting point. Thanks.

---

<div class="post-metadata">

**Author:** ![chwilliams](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@chwilliams](https://discuss.saleae.com/u/chwilliams)\
**Post date:** [May 18, 2026, 4:13pm UTC](https://discuss.saleae.com/t/standoffs-on-logic-pro-for-support/3712/5 "2026-05-18T16:13:43Z")

</div>

Initially I was thinking of something more permanent since we have multiple Saleae Logic Analyzers and this one I was thinking of would never be in “on the desk” mode.