# Saleae Logic test clip holder 3D models **URL:** \ **Category:** Support\ **Created:** [September 21, 2026, 8:18pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808 "2026-09-21T20:18:12Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![chwilliams](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@chwilliams](https://discuss.saleae.com/u/chwilliams)\ **Post date:** [September 21, 2026, 8:18pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808/1 "2026-09-21T20:18:12Z")
A while ago I reached out to Saleae support directly (in chat or email or something) and I asked if I could purchase extra test clip holders. The answer was a hard ‘no’, which was disappointing. So now I’m on here asking for something slightly different: Can Saleae please share the 3d models of the holders so we can print our own? I found some online but none of them work. We tried to create our own models by cutting a real one open, but the results weren’t ideal. Thank you. ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [September 21, 2026, 8:25pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808/2 "2026-09-21T20:25:59Z")
@chwilliams Feel free to send me (Tim) a message through support here! > **[Contact Us](https://www.saleae.com/contact)** > > Get in touch with the Saleae team for sales inquiries, technical support, or general questions about our logic analyzers and oscilloscopes. I’d be happy to accommodate test clip holder(s) for you in case you are missing/need any extra. In your message, let me know your order number pertaining to your device and we can look into helping out from there. Looking forward to hearing from you! ---
**Author:** ![r.jansen](https://avatars.discourse-cdn.com/v4/letter/r/a87d85/32.png) [@r.jansen](https://discuss.saleae.com/u/r.jansen)\ **Post date:** [September 28, 2026, 6:38pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808/3 "2026-09-28T18:38:23Z")
I have been looking at this too but have not yet got to the point where I am creating those holders myself. My Pro8 is old (10 years or so) and the deLuxe packaging was a bit different in those days. > [@chwilliams](#): > > We tried to create our own models by cutting a real one open, but the results weren’t ideal. I’d be happy to give it a go and see if I can make something that works. Would it be able to share some details on the model? Even just a reference image from the cross section would be nice. A straight photo with a ruler as reference would already be a nice start. I do have a newer Pro8 at work that I can use to do further measurements but they don’t want me to cut it open 🥲 Rob ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [September 30, 2026, 7:07pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808/4 "2026-09-30T19:07:47Z")
@r.jansen I’d be happy to send 2 test clip holders for your Pro 8! That way, you can make any measurements you’d like to make to it in-hand. Feel free to contact me using the link above if you are interested 🙂 ---
**Author:** ![chwilliams](https://avatars.discourse-cdn.com/v4/letter/c/59ef9b/32.png) [@chwilliams](https://discuss.saleae.com/u/chwilliams)\ **Post date:** [October 1, 2026, 1:50pm UTC](https://discuss.saleae.com/t/saleae-logic-test-clip-holder-3d-models/3808/5 "2026-10-01T13:50:32Z")
I’m not able to share anything right now, no. We scrapped all our material from this effort. It just wasn’t worth it. The original holders were far superior in how they were able to hold the clips reliably without too much friction. Pretty impressive, honestly.