# RPC error **URL:** \ **Category:** Logic 2 Software\ **Created:** [May 7, 2024, 6:36pm UTC](https://discuss.saleae.com/t/rpc-error/2864 "2024-05-07T18:36:43Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![nick.smith](https://avatars.discourse-cdn.com/v4/letter/n/7993a0/32.png) [@nick.smith](https://discuss.saleae.com/u/nick.smith)\ **Post date:** [June 14, 2024, 1:06pm UTC](https://discuss.saleae.com/t/rpc-error/2864/7 "2024-06-14T13:06:19Z")
I have an updated script for you to try. Somewhere between 1500 and 4000 captures, the Logic 2 application will crash. This is what causes the gRPC error. I tried the following, without success: Removing all other USB devices connected to the PC Commented out the save\_capture function call, so its not saving or exporting anything In the new script, I added a recovery mechanism to relaunch the Logic 2. This makes sure that the test will run all the way through to 4000 captures. I also noticed that the capture time increases through out the test. I plotted the time taken per capture against the capture number in the attached image. Just before the application crashes, the captures are taking a long time, anywhere between 5 and 10 seconds (it’s set to do a 0.2S capture). ![no_save_capture](https://canada1.discourse-cdn.com/flex030/uploads/saleae/original/2X/0/08edb1101927db8d0c3cd2abece5f9e63b2e65a0.png) [test\_saleae.py](https://discuss.saleae.com/uploads/short-url/r3bkpdeX8uN2abpBPKmHyIgr7Wn.py) (4.6 KB) --- _[View the full topic](https://discuss.saleae.com/t/rpc-error/2864)._