# Presets

**URL:** <https://discuss.saleae.com/t/presets/1218>\
**Category:** Logic 2 Software\
**Created:** [October 4, 2021, 6:05pm UTC](https://discuss.saleae.com/t/presets/1218 "2021-10-04T18:05:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gansler](https://avatars.discourse-cdn.com/v4/letter/g/edb3f5/32.png) [@gansler](https://discuss.saleae.com/u/gansler)\
**Post date:** [October 4, 2021, 6:05pm UTC](https://discuss.saleae.com/t/presets/1218/1 "2021-10-04T18:05:41Z")

</div>

I’m running Logic 2 2.3.37 (latest) on Windows 10 and Preset Load/Save does not seem to work right.

Here’s what works fine:

1. launch Logic 2
2. manually rename my signals
3. save preset A
4. load preset B
5. switch back to (load) preset A

Now if I close Logic 2 and relaunch, my signals are named incorrectly, and have Preset B’s name. If I now load Preset A, I still get preset B’s names, and Preset A’s contents were apparently lost.

Tried numerous times. Repeatable results.

Thanks,

-Mike

---

<div class="post-metadata">

**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\
**Post date:** [October 5, 2021, 1:01am UTC](https://discuss.saleae.com/t/presets/1218/2 "2021-10-05T01:01:10Z")

</div>

@gansler Sorry about this bug… We’re aware of it and working on a fix! I’ll keep you updated as we make progress on it.

---

<div class="post-metadata">

**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\
**Post date:** [October 26, 2021, 9:23pm UTC](https://discuss.saleae.com/t/presets/1218/3 "2021-10-26T21:23:21Z")

</div>

@gansler We’ve implemented a fix in v2.3.39! Can you try it out below?  
[https://www.saleae.com/downloads/](https://www.saleae.com/downloads/)