# Not new to Saleae but to Logic MSO

**URL:** <https://discuss.saleae.com/t/not-new-to-saleae-but-to-logic-mso/3752>\
**Category:** Logic MSO\
**Created:** [June 16, 2026, 6:24am UTC](https://discuss.saleae.com/t/not-new-to-saleae-but-to-logic-mso/3752 "2026-06-16T06:24:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pomzm67](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/pomzm67/32/2222_2.png) [@pomzm67](https://discuss.saleae.com/u/pomzm67)\
**Post date:** [June 16, 2026, 6:24am UTC](https://discuss.saleae.com/t/not-new-to-saleae-but-to-logic-mso/3752/1 "2026-06-16T06:24:25Z")

</div>

Ordered a new Saleae Logic MSO 4-channel 200 MHz yesterday, expanded to a total of 16 digital channels. My trusty original Saleae Logic finally decided it had reached end-of-life after many years of service.

Is there anything I should know about this setup, or any accessories you’d recommend to complete it?

I already have PCBite probes for all four analog channels and probes for all 16 digital channels.

My current lab also includes an old Rigol 50 MHz scope that I unlocked to 100 MHz years ago, but it’s tied to the bench. The Saleae is intended to become my portable field setup for hardware debugging and embedded work.

---

<div class="post-metadata">

**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\
**Post date:** [June 24, 2026, 10:11pm UTC](https://discuss.saleae.com/t/not-new-to-saleae-but-to-logic-mso/3752/2 "2026-06-24T22:11:36Z")

</div>

@pomzm67 Hopefully your MSO has already arrived and you’ve had a chance to use it! By the way, the PCBite probes will certainly come in handy!

For quick reference, a full list of Logic MSO accessories can be found below.

> **[Accessories](https://www.saleae.com/accessories#mso)**
>
> Probes, cables, and accessories for Saleae logic analyzers and mixed-signal oscilloscopes. Digital probes, oscilloscope probes, breakout boards, and more.

If you ever wanted to add 4 more digital channels in the future (for a total of 20 channels), you can purchase one more Digital Probe (the 5th USB-C port it would connect to would be located on the back of your MSO). This can be an option for you in case you find that you need more than 16 channels.

> **[Digital Probe](https://www.saleae.com/products/digital-probe-single-ended)**
>
> Each Digital Probe provides 4 digital (logic analyzer) inputs, with variable threshold, sampled at 1 Gbps. (1.2 Gbps in the case of Pro models). Two Digital

Also, another option for hands-off probing would be our flying-lead adapters for the MSO scope probes below.

> **[Flying-Lead Adapter for Scope Probe](https://www.saleae.com/products/analog-probe-fly-lead-adapter)**
>
> Make hands-off measurements & recordings with this flying-leads adapter. Works with the oscilloscope probes and test clips provided with every Logic MSO.

The accessories above are obviously not necessary, but can help if you have the need for them!

---

<div class="post-metadata">

**Author:** ![pomzm67](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/pomzm67/32/2222_2.png) [@pomzm67](https://discuss.saleae.com/u/pomzm67)\
**Post date:** [June 25, 2026, 6:33pm UTC](https://discuss.saleae.com/t/not-new-to-saleae-but-to-logic-mso/3752/3 "2026-06-25T18:33:14Z")

</div>

I bought cables to get 16 digital channels and SenseSeed PCBite probes to use analog channels handsfree. So pretty much what you listed there 😉

I¨m looking for nice to have equipments, softwares etc that I might have missed that will make the day easier.