# LabView intigration **URL:** \ **Category:** Uncategorized\ **Created:** [December 28, 2023, 2:56pm UTC](https://discuss.saleae.com/t/labview-intigration/2633 "2023-12-28T14:56:53Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![BitBob](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/bitbob/32/2292_2.png) [@BitBob](https://discuss.saleae.com/u/BitBob)\ **Post date:** [December 28, 2023, 6:19pm UTC](https://discuss.saleae.com/t/labview-intigration/2633/2 "2023-12-28T18:19:48Z")
As far as I know, there isn’t any direct/simple support or integration between LabVIEW and Saleae Logic. However, I think there are a few options: - Use [LabVIEW Python Node](https://www.ni.com/docs/en-US/bundle/labview-api-ref/page/functions/python-node.html) to access the [Saleae Automation features](https://www.saleae.com/automation/), specifically the [Automation Python API](https://saleae.github.io/logic2-automation/automation.html) - Use [LabVIEW gRPC Support](https://github.com/ni/grpc-labview) to access the [Logic2 gRPC services](https://github.com/saleae/logic2-automation) directly - Develop a [custom Low-Level Analyzer](https://support.saleae.com/saleae-api-and-sdk/protocol-analyzer-sdk) with [the Analyzer SDK](https://github.com/saleae/AnalyzerSDK) to interact with LabVIEW with ‘live’ data (would need to develop your own method to stream the decoded data directly) Note: here is an old post (Logic 1.x Automation API) that talked about using Socket API to communicate with LabVIEW: > [@Use socket API with LabVIEW not working](https://discuss.saleae.com/t/use-socket-api-with-labview-not-working/1311): > > Hi, It’s my first post in this forum… So nice to meet you all! slight_smile I’m currently working on a project where I will need to measure a duty cycle on 8 channels during more than 100h. So I need to automatize the data recording and I will do this through LabVIEW. So far, I’m able to connect to the server, get the connected devices. But I can’t select an active device (I got no answer, not even a NOK) and get an error (56: Timeout When Communicating Between LabVIEW and Network Devices). … --- _[View the full topic](https://discuss.saleae.com/t/labview-intigration/2633)._