# Issue rendering HLA messages in the overlay **URL:** \ **Category:** Logic 2 Software\ **Created:** [September 30, 2021, 10:30am UTC](https://discuss.saleae.com/t/issue-rendering-hla-messages-in-the-overlay/1209 "2021-09-30T10:30:05Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [October 6, 2021, 1:18am UTC](https://discuss.saleae.com/t/issue-rendering-hla-messages-in-the-overlay/1209/5 "2021-10-06T01:18:03Z")
@ciaranwoodward I found a similar issue below that seems to be resolved via using a triple-bracket method. It’s possible that the characters you describe are treated the same way as the characters described in the post below. Can you give that a try and let me know if that works? > [@Extension output message format](https://discuss.saleae.com/t/extension-output-message-format/1021/2): > > @davide.ferrari For your question below: Another question: slowly my output strings are getting too long. Is there a way to represent them on 2 lines on the analyzer result? Are you referring to the Data Table to the right of the software’s UI? If so, each row in the data table corresponds to a single decoded protocol bubble. So, if you’re HLA extension outputs a long string on to a single protocol bubble, then it will appear as a single row in the data table. Would you prefer to have a “wr… --- _[View the full topic](https://discuss.saleae.com/t/issue-rendering-hla-messages-in-the-overlay/1209)._