# Generate a True Table Output format like cvs **URL:** \ **Category:** Extensions\ **Created:** [May 16, 2022, 12:40pm UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598 "2022-05-16T12:40:57Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![giants92](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/giants92/32/870_2.png) [@giants92](https://discuss.saleae.com/u/giants92)\ **Post date:** [May 16, 2022, 12:40pm UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598/1 "2022-05-16T12:40:57Z")
Hi ! I would like to reverse a Old PAL chipset so to do this, I will capture all Input and Output of each PAL16L8 pin. I would like to save it in ‘true table’ format. So, for example like : 1101010 : 1011 1101011 : 1001 1101100 : 1001 or 1,1,1,1,1,0,1011 or 1;1;0;0;1;0;;1000 Thks a lot ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [May 17, 2022, 1:08am UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598/2 "2022-05-17T01:08:16Z")
@giants92 In case you’re working with a CLK signal, our Simple Parallel analyzer might be able to help with this. > **[Simple Parallel Analyzer - User Guide](https://support.saleae.com/protocol-analyzers/analyzer-user-guides/using-simple-parallel)** - Do you currently own a Saleae Logic, or are you planning on purchasing one for this project? If you already own one, which Saleae Logic model do you own? ([https://support.saleae.com/faq/general-faq/identify-each-saleae-device](https://support.saleae.com/faq/general-faq/identify-each-saleae-device)) - Can you explain your desired table format in more detail? - How many input and output signals are you looking at simultaneously? If I understand your truth table format correctly, you want to look at 7 inputs and 4 outputs simultaneously, is that correct? ---
**Author:** ![giants92](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/giants92/32/870_2.png) [@giants92](https://discuss.saleae.com/u/giants92)\ **Post date:** [May 17, 2022, 7:11am UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598/3 "2022-05-17T07:11:09Z")
#Do you currently own a Saleae Logic… Already bought long time ago : 2x 8 ways and 1x16 ways #Can you explain your desired table format in more detail More detail…No, I don’t know which details you want ? In need Input and Output nothing else The whole must be separated by a single character (it doesn’t matter) So… a csv file 🙂 #How many input and output signals are you looking at simultaneously No matter, it depends on the internal configuration of the PAL16L8 A ‘true table’ term is not correct I think. I will just capture WHEN the chip will be use ces entrées et sorties. They are not CLK signal on PAL16L8 And they are a propagation time between the moment when the input goes to 1 and the output goes to 1. Ex : 2 inputs, 1 output 0,1,0 ← the second input goes to 1 but, at this moment, the PAL chipset haven’t had time to work on these equations yet 0,1,1 ← next capture, the PAL chipset had time to work on these equations and the output change to 1 Of course, I ONLY need this second capture. ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [May 18, 2022, 1:00am UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598/4 "2022-05-18T01:00:24Z")
@giants92 Thanks for sharing those added details! Yes, it looks like your desired output format is possible. Here is a quick example of 5 rows of a csv export file (16 digital channels enabled). ```auto 0.000000000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 0.000007584,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0 0.000015840,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0 0.000025672,0,1,0,0,0,0,0,1,0,0,0,0,1,0,0,0 0.000025688,0,1,0,0,0,0,0,1,0,0,0,0,1,0,1,0 ``` The first column is the timestamp, and anytime a change in state occurs on any of the input channels, a new row is generated with a new timestamp that corresponds to when the output change occurs. I’ve provided instructions for exporting data in the support article below: > **[Exporting Data](https://support.saleae.com/user-guide/using-logic/exporting-data)** With this configuration, you can simultaneously capture data on 8 inputs and 8 outputs of the PAL16L8 and export that data in the format shown above. ---
**Author:** ![giants92](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/giants92/32/870_2.png) [@giants92](https://discuss.saleae.com/u/giants92)\ **Post date:** [May 31, 2022, 7:51pm UTC](https://discuss.saleae.com/t/generate-a-true-table-output-format-like-cvs/1598/5 "2022-05-31T19:51:51Z")
Yep, Thks it’s working.