# DeviceSetupFailure Automation Analog Capture **URL:** \ **Category:** Support\ **Created:** [October 8, 2024, 9:28am UTC](https://discuss.saleae.com/t/devicesetupfailure-automation-analog-capture/3091 "2024-10-08T09:28:21Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![BitBob](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/bitbob/32/2292_2.png) [@BitBob](https://discuss.saleae.com/u/BitBob)\ **Post date:** [October 9, 2024, 1:35am UTC](https://discuss.saleae.com/t/devicesetupfailure-automation-analog-capture/3091/2 "2024-10-09T01:35:04Z")
My guess would be you might be having some USB intermittent issues. Does it happen if PC stays ‘busy’ (i.e., actively using PC keyboard/mouse while script is running vs. console is essentially ‘idle’ other than the script?) Does the `Logic 2.exe` process hang/crash in Task Manager? **Quick tips:** - Make sure the Logic is only device on USB, if possible (no other USB devices connected/in use) - Make sure PC is on AC vs. battery power (set on full/high performance, not battery/lower power optimized) - Make sure USB port won’t go to sleep (Turn off all USB power saving options, so ‘always on’ and Windows won’t disable/power off port) - Try the same script on a different PC (if possible, a different model) and see if you get the same result **More possible links w/ ideas to try:** - device setup failure [Error Message: DeviceSetupFailure | Saleae Support](https://support.saleae.com/troubleshooting/device-setup-failure) - USB timeout (for tips on improving USB connection) [Error Message: ReadTimeout | Saleae Support](https://support.saleae.com/troubleshooting/device-not-able-to-keep-up) - Longer page on some old/prior USB issues (seems more for Linux, but some ideas may help/apply in general or on Windows) [Device Disconnected Error](https://discuss.saleae.com/t/device-disconnected-error/1193) --- _[View the full topic](https://discuss.saleae.com/t/devicesetupfailure-automation-analog-capture/3091)._