# Add timing marker to saved trace?

**URL:** <https://discuss.saleae.com/t/add-timing-marker-to-saved-trace/1638>\
**Category:** Uncategorized\
**Created:** [June 13, 2022, 4:25pm UTC](https://discuss.saleae.com/t/add-timing-marker-to-saved-trace/1638 "2022-06-13T16:25:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bruce.p.clemens](https://avatars.discourse-cdn.com/v4/letter/b/da6949/32.png) [@bruce.p.clemens](https://discuss.saleae.com/u/bruce.p.clemens)\
**Post date:** [June 13, 2022, 4:25pm UTC](https://discuss.saleae.com/t/add-timing-marker-to-saved-trace/1638/1 "2022-06-13T16:25:59Z")

</div>

Is it possible to add timing markers to a trace that has been previously saved? I need to add more markers and information to an existing trace.

---

<div class="post-metadata">

**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\
**Post date:** [June 13, 2022, 11:06pm UTC](https://discuss.saleae.com/t/add-timing-marker-to-saved-trace/1638/2 "2022-06-13T23:06:02Z")

</div>

@bruce.p.clemens Yes, this is possible! There’s nothing extra you need to do. After opening your previously saved capture via our Logic 2 app, you can add timing markers to it via the normal methods described in the support article below:

> **[Measurements, Timing Markers & Notes](https://support.saleae.com/user-guide/using-logic/measurements-timing-markers)**

Let me know if you run into any particular issues with that!

---

<div class="post-metadata">

**Author:** ![bruce.p.clemens](https://avatars.discourse-cdn.com/v4/letter/b/da6949/32.png) [@bruce.p.clemens](https://discuss.saleae.com/u/bruce.p.clemens)\
**Post date:** [June 14, 2022, 1:21am UTC](https://discuss.saleae.com/t/add-timing-marker-to-saved-trace/1638/3 "2022-06-14T01:21:32Z")

</div>

Thank you, timreyes.  
At one point, I thought I was prevented from adding markers due to a message indicating the saved capture was locked. But - I can’t reproduce that failure any longer. I can add markers using the procedure you describe.  
Regards,  
Bruce