# Add a plot for HLA analyzed result(signal) **URL:** \ **Category:** Extensions\ **Created:** [September 15, 2023, 2:19pm UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432 "2023-09-15T14:19:31Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![linliawxm](https://avatars.discourse-cdn.com/v4/letter/l/7cd45c/32.png) [@linliawxm](https://discuss.saleae.com/u/linliawxm)\ **Post date:** [September 15, 2023, 2:19pm UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/1 "2023-09-15T14:19:31Z")
Hello, can we add a plot to show a signal’s value change on the screen with HLA extensions ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [September 16, 2023, 12:30am UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/2 "2023-09-16T00:30:03Z")
This isn’t possible at the moment, however, we’re tracking a similar feature request below. Is this the kind of functionality you are looking for? > **[Virtual](https://ideas.saleae.com/b/feature-requests/allow-creation-of-analog-traces-based-off-of-protocol-analyzer-results/)** > > Enable protocol analyzers to output one or many numerical values that can be displayed as an analog trace. > > This would help look at protocols that are sending data periodically to be decoded and looks at how the values are changing over time. If so, we’d love to learn more about what kind of plots you are looking to create. ---
**Author:** ![linliawxm](https://avatars.discourse-cdn.com/v4/letter/l/7cd45c/32.png) [@linliawxm](https://discuss.saleae.com/u/linliawxm)\ **Post date:** [September 18, 2023, 1:37am UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/3 "2023-09-18T01:37:40Z")
Hello Yes, similar as Canlyzer signal display Frank Lin/Li Lin ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [September 18, 2023, 6:45pm UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/4 "2023-09-18T18:45:04Z")
@linliawxm I didn’t completely understand what you meant by “Canlyzer signal display.” The feature request post I linked summarizes a need for displaying decoded data results as an analog waveform. A common example would be to convert I2S decoded data into an audio analog signal that a user could view. Is this the kind of functionality you were looking for, or were you looking for something else? ---
**Author:** ![linliawxm](https://avatars.discourse-cdn.com/v4/letter/l/7cd45c/32.png) [@linliawxm](https://discuss.saleae.com/u/linliawxm)\ **Post date:** [September 19, 2023, 2:32am UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/5 "2023-09-19T02:32:15Z")
Hello Tim The Canalyzer is a software from Vector for monitoring and analyzing CAN signals. Basically it is just to show signals value change as a line chart. I think it is same as the common example you mentioned. Thanks Tim via Saleae - Logic 2 \<[notifications@saleae.discoursemail.com](mailto:notifications@saleae.discoursemail.com)\> 于2023年9月18日周一 14:55写道： ---
**Author:** ![linliawxm](https://avatars.discourse-cdn.com/v4/letter/l/7cd45c/32.png) [@linliawxm](https://discuss.saleae.com/u/linliawxm)\ **Post date:** [September 19, 2023, 2:38am UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/6 "2023-09-19T02:38:14Z")
Here is an example ![image](https://canada1.discourse-cdn.com/flex030/uploads/saleae/original/2X/8/83f1b8450b092f34f81d1100ff2183b150de8d96.jpeg) ---
**Author:** ![timreyes](https://yyz2.discourse-cdn.com/flex030/user_avatar/discuss.saleae.com/timreyes/32/108_2.png) [@timreyes](https://discuss.saleae.com/u/timreyes)\ **Post date:** [September 20, 2023, 10:43pm UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/7 "2023-09-20T22:43:54Z")
@linliawxm Thanks for confirming that for me. I’ve added a link back to this forum post in the feature request post below so we can refer back to it if needed. > **[Virtual](https://ideas.saleae.com/b/feature-requests/allow-creation-of-analog-traces-based-off-of-protocol-analyzer-results/)** > > Enable protocol analyzers to output one or many numerical values that can be displayed as an analog trace. > > This would help look at protocols that are sending data periodically to be decoded and looks at how the values are changing over time. ---
**Author:** ![janny-bb](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@janny-bb](https://discuss.saleae.com/u/janny-bb)\ **Post date:** [March 4, 2024, 11:02pm UTC](https://discuss.saleae.com/t/add-a-plot-for-hla-analyzed-result-signal/2432/8 "2024-03-04T23:02:18Z")
+1, would really like this to be able to - plot audio data - change the y-axis to say “current” or “power”, i.e. assuming you have a current-mirror shunt outputting voltage. then you want a little config option + formula that converts the voltage-value to a more useful current plot (ref: joulescope)